Single-Heated Pressure Regulator: Gas / Inconel® X750 Diaphragm / Non-Venting / Max. Inlet: 414 bar (6,000 psi) / Max. Outlet: 35 bar (510 psi) / Cv 0.06 / ATEX, IECEx & CSA Certified

Product Overview XHS410

 
INTRODUCING THE XHS410...
The XHS410 is an economical single heated regulator, available in side-entry (SE) or in-line (IL) heat transfer options to maintain sample gases in their vapour state.The SE design can be used where heat transfer is less critical, and where installations have height restrictions. The IL design maximises the heat transfer area via a spiral machined heater sheath, which mixes the gas and ensures efficient heat transfer.

The XHS410 is certified to ATEX, IECEx and CSA and its electrical enclosure meets the requirements of IP66 and NEMA 4X specifications.

XHS410 Features

• ATEX, IECEX & CSA certified
• Manifold is available in aluminium or 316 SS
• Digital display of set point or temperature
• 110 or 230V AC power supply
• Local or remote temperature setpoint adjustment via analogues 4-20mA input signal

XHS410 Applications

• Natural gas sample systems
• Oxygen sample systems
• Moisture sample system

XHS410 Specifications

Maximum Rated Inlet Pressure: 414 bar (6,000 psi)
Outlet Ranges: Up to 35 bar (510 psi)
Design Proof Pressure: 150% max. working pressure
Seat Leakage: In accordance with ANSI/FCI 70-3
Weight: 4.1kg (9lbs)

ATEX and IECEx Markings: 

  • Ex II 2 G
  • Ex db IIC T3 Gb
  • -40°C = Ta = 60°C
  • CE 2183

USA and Canada Markings:

  • US and CAN: CL I, D1 T3 Gps A-D
  • US: CL1, Zone 1 AEx db IIC T3 Gb
  • CAN: Ex db IIC T3 Gb (as IEXEx)
  • Ta: -40­­°C to 59°C



Contact Us

Separate email addresses with a comma.